(*) For HID version only
Construction Details The luminaire consists of a spigot base, lamp compartment with integral control gear and top cover and is designed to operate LEDs of up to 55W, 80/125W mercury vapour or 70/100W high-pressure sodium/metal halide lamps.
The cable entry grommet is designed for the connection of a 3 x 1.5mm2 cabtyre, of an overall diameter of 9mm.
SABS Marks The luminaire bears the SANS 475 performance mark and the SANS 60598-2-3 safety mark. Luminaire spigot entries comply with SANS 1088 - Table 1 for Type 2: ø76mm x 75mm.
Ingress Protection The luminaire has a degree of protection that complies with SANS 60598-2-3: Lamp compartment: IP 55 The IP rating is certified by an SABS test report.
Top Cover The top cover is robustly constructed from die-cast aluminium, powder coated for added protection in the colour specified and is firmly secured with a single aluminium decor casting. White reflective paint on inside.
Spigot Base The spigot base is manufactured from high-pressure die-cast aluminium, powder coated for added protection in the colour specified. The luminaire is secured to the pole by three M8 stainless steel grub screws.
Diffuser The high-impact non-discolouring acrylic diffuser bowl is hexagonal in shape and is smooth on the outside, but has internal prisms to reduce the direct glare component. A drip ridge is provided at the bottom edge to avoid direct rain water contact with the gasket.
Electrical Components The lampholder complies with VC 8011, is rated to withstand 240˚C/5kV and prevents possible loosening of the lamp caused by vibrations. The control gear is incorporated inside the luminaire and is mounted on a removable gear tray. For the LED version, the nominal voltage is rated at 198-264V 50Hz single phase. It is suitable for operation with the specified rating of the lamp on a 230V +3%/-10% 50Hz single phase system(*). All control gear components are removable and bear the relevant SABS mark. All internal wiring is Teflon® coated with protective sleeving to prevent damage by possible abrasion. All screws, bolts and metal parts are stainless steel or non-corrosive material. Mains connections are by means of a suitable screw terminal block with a wire clamping contact. Ignitors, where applicable, are of the superposed pulse type. The power factor is rated at ≥0,9.
BEKASTAR LED Optic 2800 (Symmetrical)
cd/klm200 150250 100
30˚ 15˚ 0˚
BEKASTAR 100W HPS-E
cd/klm60 4575 30
30˚ 15˚ 0˚
BEKASTAR LED Optic 5068 (Asymmetrical)
cd/klm150 100200 50
30˚ 15˚ 0˚
ro fi t