CONSTRUCTION DETAILS The luminaire consists of an aluminium extrusion body
and die-cast aluminium ends supporting the spotlight
and enclosed control gear. The luminaire bears the SANS
60598-2-5 safety mark. It has an ingress protection rating
of IP 66 in compliance with SANS 60598-2-5. The IP
rating is certified by an SABS test report.
The luminaire housing is robustly constructed, weather
proof, hail proof, corrosion proof and vandal resistant. It
is manufactured from corrosion resistant aluminium. The
front glass is mounted in a die-cast aluminium frame held
captive by two stainless steel screws, fastened to the
housing. The gasket sealing the top and bottom frames
is made of silicon sponge. It is supplied complete with an
adjustable stirrup mounting.
The luminaire is designed to operate LEDs of up to 39W.
The LEDs are effective high-power LEDs, 4000K at a
colour rendering index ≥70. The optical solution provides
a narrow, medium or wide beam. The control gear is
incorporated in the luminaire housing and is mounted on
a removable gear tray. It is suitable for operation with the
specified rating of a 120-277V 50Hz single phase system.
All internal wiring is Teflon® coated with protective
sleeving to prevent possible damage by abrasion. Mains
connections are by means of a suitable screw terminal
block in a separate compartment.
The power factor is rated at ≥0,95.
DIMENSIONS IN MM