290 BEKA SCHRÉDER Product Catalogue
Lamp compartment - IP 65
Gear compartment - IP 65
APPLICATIONS Sportsfield lighting | Security lighting | High mast
lighting | Façade lighting | Area lighting | Zone 2
applications (400W) | Parking areas | Zone 21/22
applications (400W) | Airport aprons
CONSTRUCTION DETAILS The luminaire consists of a die cast aluminium (EN 1706
AC-44300) housing with a separate but attached gearbox
designed to operate 400/600/1000W high pressure
sodium and 400/1000W metal halide tubular lamps.
SABS MARKS The luminaire bears the SANS 475 performance mark and
the SANS 60598-2-5 safety mark.
INGRESS PROTECTION IP 65 in compliance with SANS 60598-2-5.
The IP rating is certified by a SABS test report.
LUMINAIRE HOUSING The housing is robustly constructed, weatherproof, hail
proof, corrosion proof and vandal resistant.
It is manufactured from die cast aluminium
(EN 1706 AC-44300).
The front glass covering the lamp compartment is heat
and impact resistant, held to the lamp housing by
stainless steel clamps and sealed by an extruded heat
resistant silicon gasket.
REFLECTOR SYSTEM The reflector system is manufactured from 99,98%
super-pure anodized aluminium and consists of the
back reflector and two side reflectors.
The luminaire is available in an asymmetrical narrow,
medium and wide beam distribution.
LAMPHOLDER HOUSING Lamp replacement is facilitated from the side by a
high-pressure die cast aluminium lampholder housing.
It is sealed with a one-piece silicon gasket and is held
to the floodlight with two stainless steel screws.
CONTROL GEAR COMPARTMENT The control gear compartment is manufactured from
high pressure die cast aluminium for good heat
It consists of a lid and body that seals the control gear
compartment to an IP 65 ingress protection rating
The control gear compartment is attached to the
OPTIONS Inserted helicoils are available on request for the lamp
holder housing and the gear compartment to prevent
the galvanic corrosion of stainless steel screws to the
Aiming device available on request, in order to set the
floodlight to the desired aiming angle.
ELECTRICAL COMPONENTS The lamp holder complies with VC 8011, is rated to
withstand 240˚C/5kV. The control gear is incorporated
inside the control gear compartment and is mounted
on a removable gear tray.