94 BEKA SCHRÉDER Product Catalogue

LAMP COMPARTMENTS The housing is robustly constructed, weatherproof,

hailproof, corrosion proof and vandal resistant.

It is manufactured from filled ultra-violet stabilised

engineering polymer and is grey in colour.

An exterior lip of 7mm is provided on the lamp

housing to avoid direct rain water contact with the

gasket, thus ensuring that no moisture is sucked into

the diffuser when the luminaire is switched off and

cools down.

The non-discolouring clear high-impact acrylic diffuser

bowl has no external prisms and is held to the housing

by three stainless steel clips.

It remains attached to the housing when hinged open.

The gasket sealing the lamp compartment is made of

silicon sponge rubber and is fitted into a tongue-and-

groove arrangement.

Reflectors are manufactured from 99,98% super

pure deep anodised aluminium and are not subject to

accidental misalignment.

A special reflector system for tubular lamps ensures

optimum high performance.

The lampholder complies with VC 8011, is rated to

withstand 240˚C/5kV and prevents loosening of the

lamp caused by vibrations.

GEAR COMPARTMENT The gear compartment is covered by a hinged, non-

corrosive lid, which fits into a silicon sponge gasket in

the body, in a tongue-and-groove arrangement.

Access to the gear compartment is gained from

underneath by loosening one captive stainless steel

screw (nylon in the double insulated version).

The IP 66 ingress protection rating ensures that all

control gear components are protected against the




Separate spigot compartment


High-performance single-piece reflector system

Removable control gear

Suitable for use with tubular lamps

APPLICATIONS Residential streetlighting | Perimeter lighting | Security

lighting | Zone 2 applications

CONSTRUCTION DETAILS The luminaire consists of a separate lamp, gear and

spigot compartment.

It is designed to operate 2*26W compact fluorescent,

80/125W mercury vapour, 50/70/100/150W high-pressure

sodium and 70/100/150W metal halide lamps.

SABS MARKS The luminaire bears the SANS 475 performance mark and

the SANS 60598-2-3 safety mark. Luminaire spigot entry

complies with SANS 1088 - Table 1.

Side entry - ø42mm x 125mm.

INGRESS PROTECTION The luminaire has a degree of protection that complies

with SANS 60598-2-3.

Lamp compartment: IP 66

Gear compartment: IP 66

The IP ratings are certified by SABS test reports.